1. Product Description
NX-WJ series micro-crystalline ink is used
in the micro-crystalline glass sintering process, the chemical acid resistance
has passed the acid resistance test, in the wide expansion coefficient of good
matching, can better ensure the stability of the process.
2. Application of information
NX-WJ series is a kind of micro-crystalline
glass glaze, this product can be adapted to 680℃~730℃molding process,
excellent expansion coefficient matching, good acid resistance, scratch
resistance.
NX-WJ is a stable inorganic color material,
lead-free and cadmium-free glass system.
3. Technical data
|
顏色Color
|
黑色、白色（可調色）black/white
|
|
燒結范圍
Firing range
|
680℃~730℃（鋼化）
|
|
落球測試（525克鋼球，600mm）
BALL DROP Test
|
合格
Pass
|
|
光密度OD
|
＞2.5（黑色）
|
|
耐刮擦性Scratch
|
＞10N
|
|
熱膨脹系數（K數）TEC
|
0~30*10^7
|
|
耐檸檬酸（2）
（10%檸檬酸，15分鐘室溫）Citric
acid resistance
(10% citric acid, 15 min at room
temperature)
|
1
|
Note: (1). The solvent (carrier) used may
affect the performance and working window of the junction product;
(2). Data are presented according to
ASTSMC724-91;
(3). No color change was observed on the
glass non-printed surface after the evaluation test.
4. Dissolvant
NX-61-61 Pine Oil
NX-62-62 is the hydrophilic oil
Solvent glaze: recommended wet film
thickness of 20~25um, glaze and storage recommendations can be provided as
required.
5. Pack
5 KG, 10 KG plastic buckets.
6. Health and safety
This product shall be handled with good
industry hygiene and operating procedures.
7. Quality Guarantee letter- -Please read
it carefully
The product performance and use information
we contain here are recommended, and all product performance is subject to the
product test report. However, you should fully test its performance, safety,
and so on before using it. The applied recommendations cannot be regarded as
applicable in any state.
Unless the Company provides a written
certificate suitable for a specific need, the Company guarantees only the
specifications provided in the IFU without any other use. The only
responsibility of the company is to give a refund or replace the product when
the product fails to meet the listed requirements, and the company clearly
states that it will not be liable for the accident.
